The MDF is also called MDF. The surface is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the surface of the plate is well decorated. However, the MDF has poor moisture resistance. In contrast, the nail holding force of the MDF is worse than that of the particle board, and if the screw is loosened after screwing, it is difficult to fix it at the same position.

The main advantage

1. MDF is easy to finish. All kinds of paints and paints can be evenly coated on the MDF, which is the preferred substrate for the paint effect.
2. The MDF is also a beautiful decorative plate.
3. a variety of veneer, printing paper, PVC, adhesive film, melamine impregnated paper and light metal sheet and other materials can be decorated on the surface of the MDF.
4. The hard MDF board is punched and drilled, and can also be made into sound absorbing panels, which are used in the decoration engineering of buildings.
5. physical properties are excellent, the material is uniform, there is no dehydration problem.

Main disadvantage

1. The biggest disadvantage of the MDF is that it is not damp-proof, and it will swell when it sees water. When using the MDF as the skirting board, the door panel, and the window sill, you should pay attention to the six sides of the paint, so that it will not be deformed.
2. The density board has a large water expansion rate and large deformation, and the load-bearing deformation is longer than that of the homogeneous solid wood particle board. Although the moisture resistance of the MDF is poor, the surface of the MDF is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the shape is easy to avoid, causing problems such as decay and insects. It is superior to particleboard in terms of bending strength and impact strength, and the surface of the board is very decorative, which is superior to the appearance of solid wood furniture.
3. The density of the MDF is poor. Because the fiber of the MDF is very shred, the nail holding force of the MDF is much worse than that of the solid wood board and the particle board.